Wireless Access Point Model 0-1591700-x User Manual
Page 34 of 34
©2004 Tyco Electronics
Issue 3
Product Specifications
Standards Compliance
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.11a 5GHz Band at rates up to 54Mbps
IEEE802.11b 2.4GHz Band at rates up to 11Mbps
IEEE802.11g 2.4GHz Band at rates up to 54Mbps
IEEE802.1x/RADIUS Authentication
IEEE802.1f for Interoperability
RFC1213 SNMP MIB I and MIB II
EN 301 893, EN 300 328-1, EN300 328-2,
EN 301 489-1, EN 301 489-17 for DFS, TPC on .11a
EN 60 950 for Safety
FCC Part 15 for EMC
CE 0560
Protocol CSMA/CA
Network Architecture Type
Infrastructure
Media connectors
•
=
Auto-Sensing 10/100M Ethernet LAN Port RJ-45
•
=
9w D-Type Serial Console Port
Frequency Bands
802.11b/g 2.4GHz to 2.4897GHz
802.11a 5.150GHz to 5.350GHz, 5.470 to 5.725GHz
Antenna Type
Dipole antenna (non-removable to comply with FCC
regulations for IEEE802.11a)
Antenna Gain
4dBi for 2.4GHz band
5dBi for 5GHz band
Transmit Power 802.11a
100mW (+20dBm) - Full
50mW (+17dBm)
20mW (+13dBm)
10mW (+10dBm)
Transmit Power 802.11b/g
200mW (+23dBm) - Full
100mW (+20dBm)
50mW (+17dBm)
20mW (+13dBm)
10mW (+10dBm)
Typical Range – 802.11a
Indoor 20m at 54Mbps non-payload
Outdoor 40m at 54Mbps non-payload
Typical Range – 802.11b/g Indoor 35m at 54Mbps non-payload
Outdoor 70m at 54Mbps non-payload
Data Rate Fall-Back
Reduces from 54Mbps when subject to noise etc.
Encryption Keys
64 Bit, 128 Bit and 152 Bit WEP
Authentication
IEEE802.1x to RADIUS with EAP, TLS, T-TLS, MD5
Status Indicators
•
=
Power
•
=
LAN
•
=
802.11a
•
=
802.11b/g
Configuration Support
Web, Telnet, Console and SNMP
Code Update
Web or TFTP methods
Power Consumption
Typically 8W
Supply Voltages
+12v DC from AC adapter on the local power port
48v DC on the spare pairs of the Ethernet cable
Physical Size
225mm x 185mm x 40 (w d h) excluding antennae
Weight 1kg
Environmental
0’C to +50’C, 5% to 95% Relative Humidity
