Wireless Access Point Model 0-1591700-x User Manual
Page 27 of 34
©2004 Tyco Electronics
Issue 3
802.11g Menu Option
This screen is used to configure the 2.4GHz band 802.11b/g radio interfaces. Many of the settings
are have the same function as the previous 802.11a configuration screens on pages 21 onwards.
Some new values are present and these are detailed below.
Figure 22 - 802.11g Band Radio Configuration – Default Settings
Channel
The default channel for the 2.4GHz 802.11b/g band is
6
. There are only 3 non-overlapping
channels on this band (1, 6 and 11) which means that channel selection is more critical than on the
5GHz 802.11a band.
Short Preamble
This mode is selected when the access point is to be used in very high network traffic
environments. Note that the preamble value must be the same on all clients and the access point,
otherwise devices will not be able to connect. The default is
Disabled
.
