background image

 

33 

 

http://www.TYAN.com 

 

3.04.2 – Floppy Configuration Sub-Menu 

 

You can use this screen to specify options for the Floppy Configuration Settings. Use the up and 
down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of 
the selected option. The settings are described on the following pages. 

 

BIOS Setup Utility 

Main       

Advanced

       PCI/PnP       Boot       Security       Chipset       Power       Exit 

  

Floppy Configuration 

  

 
Floppy A                                                              [1.44 MB]  
Floppy B                                                              [1.44 MB] 
 

 
Use [ENTER], [TAB] or 
[SHIFT_TAB] to select a 
field 
 
Use [+] or [-] to 
configure system time. 
 
+/-     Change Field 
Tab   Select Field 
F1     Help 
F10   Save and Exit 
ESC  Exit 
 

 
 
 

Feature 

Option 

Description 

Floppy Configuration 

Disabled 

1.3MB 

720KB 

1.44/1.25MB 

Floppy A 

2.88MB 

This setting selects the type of the 
floppy disk drive installed in system.

Disabled 

1.3 MB 

720 KB 

1.44/1.25 MB 

Floppy B 

2.88 MB 

This setting selects the type of the 
floppy disk drive installed in system.

 
 
 
 

3.04.3 – Super I/O Configuration Sub-Menu 
 

You can use this screen to select options for the Super I/O settings. Use the up and down arrow 
(

Ç

/

È

) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the 

selected option 

 

 

 

 

Summary of Contents for Tomcat K8S S2850





























































Reviews: