TYAN Tomcat i945GM S3095, User Manual

Page: 74 / 86

74
9BH TP_PMCPUSPEED (Optional)
9CH TP_PM_SETUP Late SMM initialization. (Optional)
9DH TP_SECURITY_INIT Initializes the system security engine.
(Optional)
9EH TP_IRQS Enables the proper hardware interrupts.
9FH TP_FDISK_FAST_INIT2 (Optional)
A0H TP_TIME_OF_DAY Sets time of day.
A2H TP_KEYLOCK_TEST Tests if key-lock or keyboard controller
password is on. (Optional)
A4H TP_KEY_RATE (Optional)
A8H TP_ERASE_F2 Removes “Press F2” prompt from the
screen.
AAH TP_SCAN_FOR_F2 Checks if user has requested SETUP.
ACH TP_SETUP_CHECK Checks to see if SETUP should be
executed.
AEH TP_CLEAR_BOOT Clears ConfigFailedBit and InPostBit in
CMOS.
B0H TP_ERROR_CHECK Checks for POST errors.
B1H TP_ROMPILOT_UNLOAD (Optional)
B2H TP_POST_DONE Sets/clears status bits to reflect POST is
completed.
B3H TP_ENH_CMOS_STORE Stores enhanced CMOS values in Non-
volatile area. (Optional)
B4H TP_ONE_BEEP (Optional)
B5H TP_QUIETBOOT_END (Optional)
B6H TP_PASSWORD Queries for password before boot.
(Optional)
B7H TP_ACPI Setups ACPI table in shadow RAM and in
extended memory. (Optional)
B8H TP_SYSEM_INIT (Optional)
B9H TP_PREPARE_BOOT Cleans up all graphics before booting.
BAH TP_DMI Executes DMI handlers. (Optional)
BBH TP_INIT_BCVS (Optional)
BCH TP_PARITY Clears the parity error latch, set correct NMI
state.
BDH TP_BOOT_MENU Displays boot first menu. (Optional)
BEH TP_CLEAR_SCREEN Clears the screen.
BFH TP_CHK_RMDR Checks the reminder features. (Optional)
C0H TP_INT19 Cleans up the system and boots via INT
19h.
C1H TP_PEM_INIT Invokes via shutdown table to initialize PEM
data structure.
C1H TP_CHKBOOTTYPE (Optional)
C2H TP_PEM_LOG Invokes the error logging function of all
registered error handlers.
C2H TP_SAVEBOOTTYPE Saves the current boot type into CMOS.
C3H TP_PEM_DISPLAY Scans the PEMRegTbl and calls the display
function for each registered error handler in
the same order as they were registered
with the PEM.
C3H TP_CHKREQBOOTTYPE Determines if a specific boot type has been