TYAN TN76-BP016, Service Manual

Page: 101 / 109

http://www.tyan.com
101
Progress Code Description
IStep 07 – Nest Chiplets
ISTEP 07.01 Processor attribute update
ISTEP 07.02 PLL Initfile for A, X, PCIe, DMI
ISTEP 07.03 Setup PLL for A, X, PCIe, DMI
ISTEP 07.04 Start clocks on A, X, PCIe chiplets
ISTEP 07.05 Apply scom inits to chiplets
ISTEP 07.06 Apply scom inits to Xbus
ISTEP 07.07 Apply scom inits to Abus
ISTEP 07.08 Apply scom inits to PCIE chiplets
ISTEP 07.09 Apply sequenced scom inits
IStep 08 – EDI, EI Initialization
ISTEP 08.01 Restore Fabric/EDI Bus eRepair data
ISTEP 08.02 Calibrate Fabric/EDI interfaces
ISTEP 08.03 Advanced pre EI/EDI training
ISTEP 08.04 Run training on internal buses
ISTEP 08.05 Advanced post EI/EDI training
ISTEP 08.06 Load PRD for powerbus domain
ISTEP 08.07 Start listening for attentions
ISTEP 08.08 Lower functional fences on local SMP
IStep 09 – Activate PowerBus
ISTEP 09.01 Integrate P8 Processor Chip (PgP) Islands into SMP
ISTEP 09.02 Placeholder for secure boot
IStep 10 – Hostboot SBE Centaur Init
ISTEP 10.01 Hook for PRD to handle reconfig
ISTEP 10.02 TP Chiplet init
ISTEP 10.03 Program Nest PLL
ISTEP 10.04 Setup Nest PLL
ISTEP 10.05 Cen TP Chiplet init 2
ISTEP 10.06 Cen TP Chiplet array init
ISTEP 10.07 Cen TP Chiplet Start clocks
ISTEP 10.08 Cen Chiplet Init
ISTEP 10.09 Chiplet array init
ISTEP 10.10 Cen DTS init
ISTEP 10.11 Cen Scan overrides
ISTEP 10.12 Manual Cen Scans
ISTEP 10.13 Start Cen Nest