31
http://www.tyan.com
2.23 – Heatsink Installation Procedures
Type A: CAM LEVER (TYPE) INSTALLATION
1. After placing the back plate and
interface material under motherboard
，
place heatsink retention frame on top of
motherboard.
Align plastic retention bracket screw
hole with CPU back-plate standoffs.
Tighten screws to secure plastic
retention bracket
.
Repeat for on other
side.
DO NOT OVER TIGHTEN.
2. After tightening screws secure metal
clip to plastic retention bracket center
tab. Repeat for on other side of heatsink.
3. After securing metal clip to plastic
retention bracket center tab, push down
on plastic clip to lock plastic clip to side
tab.
