TYAN THUNDER I7525, User Manual

Page: 29 / 70

Thunder i7525 (S2676)
http://www.tyan.com
26
NOTE
YOU MUST unplug the power supply before plugging in the 24-pin and 8-pin
power cables to motherboard connectors.
3.10 – Finishing Up
Congratulations on making it this far! You’re finished setting up the hardware aspect of your
computer. Before closing up your chassis, make sure that all cables and wires are connected
properly, especially IDE cables and most importantly, jumpers. You may have difficulty powering
on your system if the motherboard jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by asking your
vendor for assistance. If they are not available for assistance, please find setup information and
documentation online at our website or by
calling your vendor’s support line.