TYAN THUNDER HESL-T, Manual

Page: 41 / 48

41
http://www.TYAN.com
Appendix II: About Adaptec NightHawk Compatibility
The Adaptec NightHawk has a standard 64-bit, 3.3V PCI interface, but will only function properly
when inserted into a PCI slot supporting Adaptec’s Embedded RAID Logic (EMRL) or Intel's
RAIDIOS(tm) logic.
To install the NightHawk controller, insert the device into the supported ZCR enabled PCI slot on
the motherboard. To find out where the 3.3V PCI slot is, check
p.8 for location (refer to the mini-
map of the motherboard).
To ensure proper installation, examine the systems screen during system boot. Instead of
showing an Adaptec SCSI BIOS message, the system will display an Adaptec I
2
OBIOS message
indicating the results of its SCSI scans and RAID device creation.
Refer to the Adaptec ZCR controller device documentation for more details on installation
and setup.