http://www.tyan.com
21
JP7: S1/S2 PCI-X Frequency Select Jumper
JP9: P1 PCI-X Frequency Select Jumper
3
1
(Default) - Based on card
3
1
Force to run at 100MHz or less
JP11: Clear CMOS Jumper
1
3
Clear
1
3
Normal (Default)
Use this jumper when you have forgotten your system/setup
password or need to clear the system BIOS settings.
How to clear the CMOS data
-
Power off system and
disconnect the power supply
from the AC source
-
Use jumper cap to close Pin 2 and 3 for several seconds
to Clear CMOS
-
Replace jumper cap to close Pin 1 and 2 Reconnect the
power supply to the AC source
- Power on system
Summary of Contents for THUNDER H2000M
