TYAN Tempest i5000VF S5370 User Manual Download Page 44

Page: 44 / 75

Memory Branch Mode

This option is used to select the type of memory operation mode.

Interleave

/ Sequential / Single Channel 0

Enhanced x8 Detection

This feature is used to enable/disable enhanced x8 DRAM UC error detection.

Enabled

/ Disabled

Force ITK Config Clocking

This feature is used to enable/disable FBD configuration for ITK test suite.

Enabled /

Disabled

Watchdog Timer

This feature allows you to enable watchdog timer.

2 Mins / 4 Mins / 6 Mins / 8 Mins

10 Mins /

Disabled

Enable Multimedia Timer

This feature is used to enable/disable Multimedia Timer support.

Yes /

Parallel ATA

This feature is used to enable the PATA function.

Enabled / Disabled /

Channel 0

Serial ATA

This feature is used to enable the SATA function.

Enabled

Disabled

Native Mode Operation

This feature is used to choose Native Mode for ATA. However, certain OS is not
supported under Native Mode.

Auto

/ Serial ATA

SATA Controller Mode Option

This feature is used to select SATA controller mode. In “compatible mode”,
SATA and PATA drives are auto-detected and placed in Legacy mode. In
“Enhanced mode”, SATA and PATA drives are auto-detected and placed in
Native IDE mode.

Compatible

/ Enhanced

SATA RAID Enable

This feature is used to enable the SATA RAID.

Disabled

Enabled

SATA AHCI Enable

This feature is used to enable the SATA AHCI.

Disabled

Enabled

Summary of Contents for Tempest i5000VF S5370












































































Search results

Summary of Contents for Tempest i5000VF S5370

Reviews:

Related manuals for Tempest i5000VF S5370

Brands by name

Popular brands

TYAN Tempest i5000VF S5370, User Manual

Search results

Summary of Contents for Tempest i5000VF S5370

Reviews:

Related manuals for Tempest i5000VF S5370

Brands by name

Popular brands