TYAN Tank FT48 B5382, Service Manual

Page: 55 / 94

Chapter 3: Replacing Pre-installed Components 47
3.4 Removing the Front Door Assembly
A door is supplied with the FT48-B5382 that can be used
when the unit is rack mounted or standalone. Follow these
instructions to remove the door.
1. Pull out the four fixing bars locking the door assembly
onto the server.
2. Remove the door assembly from the four holes located
on the lower edge of the server.
To replace the door assembly:
1. Tilt the door assembly and fit the four protruding tips into
the holes located on the lower edge of the server.
2. Place the door assembly in place and make sure that the
four fixing bars are locked onto the server.