TYAN TACHYON G9000, User Manual

Page: 15 / 52

Chapter 2
Installing the Hardware and Software
http://www.tyan.com
9
2. Click Start
Æ
Settings
Æ
Control Panel and select Add/Remove
Programs.
3. Select your current graphic drivers and click Add/Remove…
4. *The Wizard will help you remove your current display drivers.
5. The System should be restarted after the drivers have been removed.
*If the previously installed graphics card has any additional software
installed, they may also need to be removed at this point. (For example
DVD Player, Multimedia applications, etc.)
Installing Your Tachyon Graphics Card
Now that you have prepared your computer, you are ready to install your card.
If you are not sure whether your card is PCI or AGP, compare the bottom edge
of your card with the following illustration:
To install your card
1.
Power off the computer and monitor , then disconnect the display
cable from the back of your computer.
2.
Remove the computer cover . If necessary, consult your computer’s