TYAN TACHYON G9000, User Manual

Page: 13 / 52

Chapter 2
Installing the Hardware and Software
http://www.tyan.com
7
Chapter 2
Installing the
Hardware and Software
Installing your card consists of three, easy steps.
Placing the card in your computer
Installing ATI’s enhanced display drivers
Attaching input and output cables and optional TV, VDR, camcorder,
etc.
This chapter explains how to place the card in your computer, how to install the
software, and how to connect the input and output cables.
BEFORE installing your Card…
Turn off the power to your system, and discharge your body’s
static electric charge by touching a grounded surface — for
example, the metal surface of the power supply –- before
performing any hardware procedure.
The manufacturer assumes no liability for any damage, caused
directly or indirectly, by improper installation of any components
by unauthorized service personnel. If you do not feel
comfortable performing the installation, consult a qualified
computer technician.
Damage to system components, the accelerator card, and injury
to yourself may result if power is applied during installation.
To ensure a successful installation of your Tachyon Graphics Accelerator card,
you MUST do the following BEFORE replacing your current graphics card
with your new Tachyon Graphic card:
Install AGP Drivers for non-Intel Chipset Based Motherboards. Several AGP
motherboard manufacturers use non-Intel AGP chipsets. Chipsets include
those made by Acer Laboratories (ALI), Silicon Integrated Systems (SIS), and
VIA Technologies, Inc. Each non-Intel chipset requires the installation of a
custom Virtual GART (AGP) Driver. This driver is required by your new
Tachyon graphic card to function correctly with your motherboard. It is very