TYAN S8253, Manual

Page: 101 / 158

http://www.tyan.com
101
MCA error thresh enable
Default is 10 and the threshold range is from 1 to 4095.
3.5.1.1 CCD/Core/Thread Submenu
CCD Control
Sets the number of CCDs to be used. Once this option has been used to remove
any CCDs, a POWER CYCLE is required in order for future selections to take effect.
Auto / 2 CCDs / 3 CCDs / 4 CCDs / 6 CCDs
Core control
Sets the number of Cores to be used. Once this option has been used to remove
any Cores, a POWER CYCLE is required in order for future selections to take effect.
Auto / TWO (1 + 1) / FOUR (2 + 2) / SIX (3 + 3)
SMT Control
Can be used to disabled symmetric multithreading. To re-enable SMT, a POWER
CYCLE is needed after selecting the
“Auto” option.
Disabled / Enabled / Auto