TYAN S8228, Notice

Page: 32 / 92

http://www.TYAN.com
32
PWR 2: J34 4-Pin Molex Power Connector (Barebones use only)
Signal Pin Pin Signal
+12V
1 2
GND
GND
3 4
+5V
The 4-pin Molex Power Connector is provided for exclusive use
with the TYAN YR190-B8228-X2 barebones solution to provide
power for the HDD backplane.
2.13 - Finishing Up
Congratulations on making it this far! You’re finished setting up the hardware
aspects of your computer. Before closing up your chassis, make sure that all
cables and wires are connected properly, especially IDE cables and most
importantly, jumpers. You may have difficulty powering on your system if the
motherboard jumpers are not set correctly. In the rare circumstance that you
have experienced difficulty, you can find help by asking your vendor for
assistance. If they are not available for assistance, please find setup
information and documentation online at our website or by calling your
vendor’s support line.