TYAN S8036, Manual

Page: 45 / 139

http://www.tyan.com
45
2.13 Installing the Power Supply
There are Three (3) power connectors on your S8036 motherboard. The S8036
supports EPS 12V power supply.
PWR1: ATX 24-Pin Power Connector
Signal Pin Pin Signal
+3.3V_1 1 13 +3.3V_4
+3.3V_2 2 14 -12V
COM_1 3 15 COM_4
+5V_1 4 16 PS-ON#
COM_2 5 17 COM_5
+5V_2 6 18 COM_6
COM_3 7 19 COM_7
PWR_OK 8 20 RES
5VSB 9 21 +5V_3
+12V_1 10 22 +5V_4
+12V_2 11 23 +5V_5
+3.3V_3 12 24 COM_8
PWR2/PWR3: 8-pin CPU0 Power Connector
Signal Pin Pin Signal
GND 1 5 +12VA1
GND 2 6 +12VA1
GND
3 7
+12VA1
GND 4 8 +12VA1
2.14 Finishing Up
Congratulations on making it this far! You have finished setting up the hardware
aspect of your computer. Before closing up your chassis, make sure that all cables
and wires are connected properly, especially SATA cables and most importantly,
jumpers. You may have difficulty powering on your system if the motherboard
jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by
asking your vendor for assistance. If they are not available for assistance, please find
setup information and documentation online at our website or by calling your vendor’s
support line.