TYAN S8032, Manual

Page: 39 / 161

http://www.tyan.com
39
2.11 Installing Add-In Cards
Before installing add-
in cards, it’s helpful to know if they are fully compatible with
your motherboard. For this reason, we’ve provided the diagrams below, showing
the slots that may appear on your motherboard.

A: OCP B slot (OCP1_B)


B: OCP A slot (OCP1_A)

C: PCIE 3.0 SLOTx24 (PESLOT1)

D: PCIE 3.0 SLOTx24 (PESLOT2)

Simply find the appropriate slot for your add-in card and insert the card firmly. Do
not force any add-in cards into any slots if they do not seat in place. It is better to try
another slot or return the faulty card rather than damaging both the motherboard
and the add-in card.
TIP:
It’s a good practice to install add-in cards in a staggered manner rather than
making them directly adjacent to each other. Doing so allows air to circulate within
the chassis more easily, thus improving cooling for all installed devices.
NOTE: You must always unplug the power connector from the motherboard
before performing system hardware changes to avoid damaging the board or
expansion device.