TYAN S7120 Manual Download Page 79

Page: 79 / 172

http://www.tyan.com

Intel® VT for Directed I/O (VT-d)

Enable/Disable Intel® Virtualization Technology for Directed I/O (VT-d) by reporting
the I/O device assignment to VMM through DMAR ACPI Tables.

Disabled /

Enabled

DMA Control Opt - In Flag

Enable/Disable DMA_CTRL_PLATFORM _OPT_IN _FLAG in DMAR table in ACPI.
Not compatible with Direct Device Assignment(DDA).

Disabled /

Enabled

Interrupt Remapping

Enable/Disable VT_D Interrupt Remapping Support

Auto

/ Enable / Disable

X2APIC Opt Out

Enable/Disable X2APIC_OPT_OUT bit

Disabled

/ Enabled

Pre-boot DMA protection

Enable DMA protection in Pre-boot environment (If DMAR table is installed in DXE
and If VTD_INFO_PPI is installed in PEI.)

Disabled

/ Enabled

3.3.8.5.4 Intel® VMD technology Submenu

Summary of Contents for S7120













































































































































































Search results

Summary of Contents for S7120

Reviews:

Brands by name

Popular brands

TYAN S7120, Manual

Search results

Summary of Contents for S7120

Reviews:

Brands by name

Popular brands