TYAN S7025, User Manual

Page: 65 / 85

http://www.tyan.com
65
3.10 - Security Menu
The system can be configured so that all users must enter a password
every time the system boots or when BIOS Setup is entered, using either
the Supervisor password or User password. The Supervisor and User
passwords activate two different levels of password security. If you select
password support, you are prompted for a one to six character password.
Type the password on the keyboard. The password does not appear on
the screen when typed. Make sure you write it down. If you forget it, you
must clear CMOS and reconfigure.
BIOS Setup Utility
Security
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Install or change the
password.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
Security Settings
Not Installed
Supervisor Password
Installed
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
Not Installed
User Password
Installed
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
Change Supervisor
Password
__
Selects this option to change
or install Supervisor Password.
Change User Password __
Selects this option to change
or install User Password.
Disabled
Boot Sector Virus
Protection
Enabled
When it is set to [Enabled],
BIOS will issue a virus warning
message and beep if a write to
the boot sector or the partition
table of the HDD is attempted.