TYAN S5501 Notice Download Page 49

Page: 49 / 96

http://www.tyan.com

3.2.2 IDE Configuration Sub-Menu

You can use this screen to select options for the IDE Configuration Settings.

Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus>
keys to change the value of the selected option.

Feature Option

Description

IDE Configuration

IDE

RAID
AHCI

Configure SATA as

Disabled

Select legacy IDE, RAID or AHCI
as the SATA interface.

Enhanced

Disabled

SATA#1 IDE Configuration

Compatible

Configure SATA#1 devices

Enhanced

Disabled

SATA#2 IDE Configuration

Compatible

Configure SATA#2 devices

Disabled

Hard Disk Write Protect

Enabled

Enable/Disable device write
protection. This will be effective
only if device is accessed through
BIOS.

IDE Detect Time Out (Sec)

(at 5 interval)

Select the time out value for
detecting ATA/ATAPI device(s).

Summary of Contents for S5501

































































































Search results

Summary of Contents for S5501

Reviews:

Related manuals for S5501

Brands by name

Popular brands

TYAN S5501, Notice

Search results

Summary of Contents for S5501

Reviews:

Related manuals for S5501

Brands by name

Popular brands