TYAN S5501, Notice

Page: 28 / 96

28
http://www.tyan.com
2.6 Finishing Installing the Heatsink
After you have finished installing the heat sink onto the processor and socket,
attach the end wire of the fan (which should already be attached to the heat sink) to
the motherboard. The following diagram illustrates how to connect fans onto the
motherboard.
Once you have finished installing all the fans you can connect your drives (hard
drives, CD-ROM drives, etc.) to your motherboard.
NOTE
Adequate system airflow is required to ensure SAS controller
and attached drives work properly.
It is the responsibility of the
system builder to ensure adequate system airflow by choosing
the correct chassis and system components.