33
http://www.tyan.com
We suggest using a 750W or higher power supply; this is of course dependent on how
many devices you attach
.
A 750W power is sufficient for systems without many devices
(i.e. 1 hard drive, 1 optical drive, and 1 or 2 expansion cards) however a higher wattage
solution may be needed if the system is fully loaded. Refer to the
www.tyan.com
website
for further information.
NOTE:
The Tempest i5400XT (S5396) peripheral drive power connector must be
independent of any other devices. A device such as a DVD/CD-ROM drive, hard drive, or
any other devices cannot be attached onto the same power line. If connected, system
stability is compromised.
NOTE
YOU MUST
unplug the power supply before plugging the power cables to
motherboard connector s.
2.12 - Finishing up
Congratulations on making it this far! You’re finished setting up the hardware aspect
of your computer. Before closing up your chassis, make sure that all cables and wires
are connected properly, especially IDE cables and most importantly, jumpers. You
may have difficulty powering on your system if the motherboard jumpers are not set
correctly.
In the rare circumstance that you have experienced difficulty, you can find help by
asking your vendor for assistance. If they are not available for assistance, please find
setup information and documentation online at our website or by
calling your
vendor’s support line.
