TYAN S5120 User Manual Download Page 46

Page: 46 / 97

Tomcat i915 S5120

Chapter 3: BIOS Setup

3-19

http://www.tyan.com

USB Mouse Support

Set this option to enabled if your system has a USB controller (including USB 2.0) and a USB
mouse.

•

Disabled

•

Enabled

Onboard Audio

This enables/disables the on board Azalia sound chip. The default is Auto, which automatically
determines whether to enable or disable this chip.

•

Auto

•

Disabled

Onboard Intel LAN Ctrl

This enables/disables the onboard Intel LAN Controller. Disabling this will stop all network
activity if you are using this controller to connect to the network.

•

Enabled

•

Disabled

Onboard Promise RAID Ctrl

This enables/disables the onboard Promise Raid Controller. Disabling this will disable access
to any connected RAID devices.

•

Enabled

•

Disabled

Onboard VIA 1394 Ctrl

This enables/disables the onboard VIA 1394 (FireWire) controller. Disabling this will disable
access to any connected FireWire devices.

•

Enabled

•

Disabled

Promise Mode Select

This controls the configuration of the promise IDE port. Options are:

•

Raid

•

Ultra ATA

Onboard Broadcom LAN PXE Boot ROM

This controls if the onboard Lan will is run on boot up. Lan Boot ROMs are used to download
operating system code from a network server. Options are:

•

Disabled

•

Enabled

Summary of Contents for S5120


































































































Search results

Summary of Contents for S5120

Reviews:

Related manuals for S5120

Brands by name

Popular brands

TYAN S5120, User Manual

Search results

Summary of Contents for S5120

Reviews:

Related manuals for S5120

Brands by name

Popular brands