http://www.TYAN.com
43
PCI Configuration
Menu Item
Configure PCI devices.
IDE Configuration
Menu Item
Configure IDE interface.
Floppy Configuration
Menu Item
Configure
floppy
interface.
I/O Device Configuration
Menu Item
Peripheral
configuration
Hardware Monitor
Menu Item
Enable/disable the onboard
Hardware monitor device
Console Redirection
Menu Item
Additional setup menus to
configure console.
Watchdog Timer Option
Menu Item
Watchdog Timer configuration
3.4.1 – Hammer Configuration Sub-Menu
You can use this screen to select options for the Hammer Configuration settings. Use
the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
*CPU/Memory Controller WARNING*
Changing options to unsupported values
might hang the system. If this happens clear
CMOS and reboot
Mem Clock Mode:
Value:
Mode Memory Interleave:
Dram Bank Interleave
Large Memory Simulation:
HT-LDT Frequency:
MTRR Mapping
ACPI SRAT Table
[Auto]
[100 MHz]
[Disabled]
[Disabled]
[Disabled]
[200 Mhz]
[Discrete]
[Disabled]
F1: Help
↑↓
: Select Item -/+: Change Values F9: Setup Defaults
Esc: Exit
←
→
: Select Screen Enter: Select
Sub-Menu
F10: Previous Values
