http://www.tyan.com
68
3.9.1.1 – Memory Configuration Sub-Menu
This menu has options for memory speed & latency. Use the up and down arrow (
Ç
/
È
)
keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the
selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security
Chipset
Exit
Memory Configuration
Memclock Mode
MCT Timing Mode
Bank Interleaving
Enable Clock to All Dimms
MemClk Tristate C3/ATLVID
Memory Hole Remapping
[Auto]
[Auto]
[Auto]
[Disabled]
[Disabled]
[Enabled]
MEMCLK can be set by
the code using AUTO, or
if you use LIMIT, you can
set one of the standard
values.
←
→
Select Screen
↑↓
Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature
Option
Description
Memory Configuration
Limit
Auto
Memclock Mode
Manual
Select the DRAM Frequency
programming method. If Auto, the
DRAM speed will be based on SPDs.
If Limit, the DRAM speed will not
exceed the specified value. If
Manual, the DRAM speed specified
will be programmed by users.
Manual
MCT Timing Mode
Auto
Allows user to configure the MCT
Timing Mode manually.
Disabled
Bank Interleaving
Auto
Enable Bank Memory Interleaving
Disabled
Enable Clock to All Dimms
Enabled
Enable unused clocks to Dimms
even memory slots are NOT
populated.
Disabled
MemClk Tristate C3/ATLVID
Enabled
Enable/Disable MemClk Tri-Stating
during C3 and Alt VID
Enabled
Memory Hole Remapping
Disabled
Enable Memory Remapping around
Memory Hole
