http://www.TYAN.com
72
3.9.1.1 – Memory Configuration Sub-Menu
This menu has options for memory speed & latency. Use the up and down
arrow (
Ç
/
È
) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security
Chipset
Exit
Memory Configuration
Memclock Mode
User Config Mode
Bank Interleaving
Burst Length
Enable Clock to All DIMMs
HardWare Memory Hole
[Auto]
[Auto]
[Auto]
[4 Beats]
[Disabled]
[Disabled]
MEMCLK can be set
by the code using
AUTO, or if you use
LIMIT, you can set
one of the standard
values.
←
→
Select Screen
↑↓
Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature
Option
Description
Memory Configuration
Limit
Memclock Mode
Auto
MEMCLK can be set by the code
using AUTO, or if you use LIMIT,
you can set one of the standard
values.
Manual
MCT Timing Mode
Auto
Allows user to configure the MCT
Timing Mode manually.
Manual
User Config Mode
Auto
Allows user to set the User Config
Mode manually.
8 Beats
4 Beats
Burst Length
2 Beats
Burst length can be set to 8 or 4
beats. 64 bit DQ must use 4 beats.
Disabled
SoftWare Memory Hole
HardWare Memory Hole
Enabled
Allows user to enable software /
hardware memory remapping
around memory hole.
No Reduction
-15%
-30%
CPU1 Mem DQ Driver
Strength
CPU2 Mem DQ Driver
Strength
-50%
This field controls the drive strength
reduction of the Memory DQ pins.
