http://www.TYAN.com
62
Enabled
Disabled
Resume On PME#
Enabled
An input signal from PME on the PCI
card awakens the system from a sof t
off state.
Disabled
Resume On RTC Alarm
Enabled
When set to Enabled RTC Alarm
resume, you could set the date (of
month) and timer (hh:mm:ss), any
event occurring at will awaken a
system which has been powered
down.
On / Off
Standby
Power Button Mode
Suspend
Specifies how the externally
mounted power button on the front of
the chassis is used.
Feature
Option
Description
APM Configuration
Power On
Power Off
Restore on AC/Power
Loss
Last State
Configures how the system board
responds to a power failure
3.10 – BIOS Exit Menu
You can display an Exit BIOS Setup option by highlighting it Arrow (
á
/
â
) keys and
pressing Enter.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Power
Exit
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Charges
Load Optimal Defaults
Load Failsafe Defaults
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a
field
Use [+] or [-] to configure
system time.
?
?
Select Screen
? ?
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Save Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are stored into CMOS.
System will use the new settings to boot up.
