background image

 

18 

 

http://www.tyan.com  

 

2.18 –  Installing the Processor and Heatsink  

 
The S2662 supports the mPGA478 Pentium 4 processors technologies from Intel. For important 
CPU information, please check Tyan’s web site at: 

www.tyan.com

 .

 

 
The following diagrams will detail how  to install your processor: 
 

 

 

The processors you choose to use may not look exactly like the one pictured above, nor will the 
socket look exactly the same.  The diagram is a visual guide to help you install processors.  
 

1. 

Lift the lever on the socket as far back as possible to the socket. 

2. 

Align the processor with the socket. There are keys underneath the processor just like 
on memory modules to ensure that they insert the correct way.  

3. 

Seat the processor firmly into the socket by gently pressing down until  the processor 
sits flush with the socket.  

4. 

Place the socket lever back down until it snaps into place. 

5. 

Your processor is installed. 

 

Take care when installing the processor as it has fragile connector pins that can bend and 
break if inserted improperly. 

 
 
 

Heatsink Installation 

After you are done installing the processor, you should proceed to installing the heatsink. The 
heatsink will ensure that the processor does not overheat, and will continue to operate at 
maximum performance. An overheated processor is  also dangerous to the long- term reliability of 
the motherboard. 
 
 
 

Summary of Contents for S2662









































Reviews: