background image

http://www.tyan.com

38

3.2-D. IDE Devices screen

Options related to the PCI slots can be altered through this screen.

(continued on next page)

Primary Master/Slave

Discussed 

below

Secondary Master/Slave

Discussed 

below

Type

FORMAT:
OPTIONS:

[

option

]

NOTES:

All options are dependent on the drive.

None

1 to 39

Auto-typing is not able to 
supply the drive type, or 
the user has selected 

None

 to disable any 

drives that might be 
installed.

Pre-configured drive 
parameters. This option is 
dependent on your drive.

User

The user must define the 
different parameters of 
the drive.

Auto

Auto-detect the drive 
parameters.

IDE Removeable

Removeable read-and-
write media (e.g. Zip 
drive).

CD-ROM

Readable CD-ROM drive.

ATAPI  Removeable Removeable ATAPI media 

(e.g. USB Zip drive).

Disabled

DIsables the feature.

FORMAT:

[

option

]

NOTES:

All options are dependent on the drive.

OPTIONS:

Multi-Sector Transfers

FORMAT:

NOTES:

OPTIONS:

LBA Mode Control

32-bit I/O

FORMAT:

NOTES:

OPTIONS:

Standard

Standard is 1 sector per 
block.

2 sectors
4 sectors
8 sectors
16 sectors

Number of sectors trans-
ferred per block.

Disabled / Enabled Enabling LBA causes logi-

cal block addressing to be 
used in place of Cylin-
ders, Heads, and Sectors.

All options are dependent on the drive.

[

option

]

[

option

]

Disabled / Enabled Enables 32-bit communi-

cation between CPU and 
IDE card. Requires PCI or 
local bus.

All options are dependent on the drive.

Summary of Contents for S2603



































































Reviews: