Thunder i860 S2603
37
3.2-B. Chipset screen
Options related to the chipset functions can be altered through this screen.
3.2-C. Floppy Disk Drive screen
Options related to the Floppy Drive interface can be altered through this screen.
Extended
Specifies if there is a sec-
tion of memory that can-
not be addressed by the
ISA bus. If the memory
hole exists, extended
memory will handle it.
FORMAT:
[
option
]
NOTES:
Select Yes when required to restore the manu-
facturer’s defaults.
OPTIONS:
Memory Hole
No
No memory hole.
Disabled
No error checking.
FORMAT:
[
option
]
OPTIONS:
ECC Config
NOTES:
Select Yes when required to restore the manu-
facturer’s defaults.
ECC (multiple bits) Error checking & status
report enabled. Data is
corrected.
None
Structure of Management
Information
FORMAT:
[
option
]
OPTIONS:
ECC Error Type
System Control Interrupt
SMI
SCI
NMI
Non-Maskable Interrupt
No error type specified
None
ERR signal output for a
single bit
FORMAT:
[
option
]
OPTIONS:
SERR Signal Condition
ERR signal output for
multiple bits
Single bit
Multiple bits
Both
ERR signal output for
both instances.
ERR signals not output
under any condition.
Floppy Disk Drive A:
FORMAT:
OPTIONS:
360KB, 5 1/4”
1.2MB, 5 1/4”
720KB, 3 1/2”
1.44/1.25MB, 3 1/2”
2.88MB, 3 1/2”
Not Installed
Disabled
[
size in MB
] [
media dimensions
]
NOTES:
This option is provided for your floppy device
needs. It is also linked to the
Boot Sequence
in the
Boot Menu
.
