manualshive.com logo in svg

TYAN S2505, User Manual

Share
Download
TYAN S2505 User Manual Download Page 4

http://www.tyan.com

4

Chapter 1: Introduction

1.1 Overview

The Tiger 200™ is a high performance motherboard designed for server and performance applications

that require the power of dual Intel

®

 Pentium

®

 III processors. This motherboard utilizes the VIA Apollo

Pro 133A chipset and can support CPU speeds of 500 MHz through 1 GHz and front side bus speeds of

100 MHz or 133 MHz.  Please see Tyan’s website for updates and information concerning CPU informa-

tion and support:

http://www.tyan.com

This integrated performance board is supported in an ATX form factor. Some of the features included are

onboard UltraDMA-33/66/100 support, UltraDMA-33/66/100 Promise

® 

FastTrak100 IDE RAID (0, 1, 0+1),

and two Intel

®

 82559 10/100 LAN controllers.

With I/O and drive controller support onboard, the one 2x/4x mode AGP slot and five 32-bit PCI v2.2 slots

are free for numerous types of add-on expansion cards. The four 168-pin DIMM sockets can support up

to 2GB* of PC100 memory or 1.5GB* of PC133 SDRAM.

Remember to visit Tyan’s website at 

http://www.tyan.com

. There you can find information on all of

Tyan’s products with FAQs, distributors list, and BIOS settings explanations.

* 2.0GB total memory @ 4 DIMMs only, when using 100MHz SDRAM
  1.5GB total memory @ 3 DIMMs only, when using 133MHz SDRAM
  Check the Tyan website for details on memory compatibility: 

http://www.tyan.com

Summary of Contents for S2505























































Reviews:

No comments

Brands by name

Popular brands

Load more brands