manualshive.com logo in svg

TYAN S1830 TSUNAMI AT, User Manual, Page: 60 / 73

Share
Download
TYAN S1830 TSUNAMI AT User Manual Download Page 60

http://www.tyan.com

60

sector or the partition table of the hard disk drive will halt the system and
produce an error message. If a warning appears, you should run an anti-virus
program to locate the problem. This feature protects only the boot sector, not
the entire drive. Note that some disk diagnostic programs will trigger a virus
warning message.

Detect IDE Utility

You can ask the BIOS to detect all of the attached IDEs at once by selecting
the Detect IDE Utility option (you can detect IDEs individually in the Standard
Setup menu). After a second or so (during which you can cancel the detection
by clicking on the <Cancel> button with your mouse) the following dialog box
will appear:

Note that you can change the PIO, Block, and LBA modes in this dialog box by
selecting the shaded boxes around those values. See pages 40-42 for a
description of the drive parameters and of PIO, Block, and LBA modes. Values
may differ from illustration depending on the type of hard drive installed.

Chapter 4

BIOS Configuration

Virus Protection

      Disabled

      Enabled

Auto Detection Status

Type

Cyl

Hd WP Sec Size(MB) PIO Block LBA

Pri Master: User   4969 16 0

63 2446

4

On

On

Pri Slave: Not Detected

Sec Master: Not Detected

Sec Slave: Not Detected

Summary of Contents for S1830 TSUNAMI AT










































































Reviews:

No comments