TYAN S1830 TSUNAMI AT User Manual Download Page 45 | Manualshive

Page: 45 / 73

TYAN S1830 TSUNAMI AT User Manual Download Page 45

S1830 Tsunami AT

45

BIOS

Fail-Safe Default

Optimal Default

DMA-1 Type

Normal ISA

Normal ISA

DMA-2 Type

Normal ISA

Normal ISA

DMA-3 Type

Normal ISA

Normal ISA

DMA-5 Type

Normal ISA

Normal ISA

DMA-6 Type

Normal ISA

Normal ISA

DMA-7 Type

Normal ISA

Normal ISA

CPU Bus Frequency

Auto

Auto

** Setting is not selectable

USB Function
Set this option to Enabled to enable USB (Universal Serial Bus) support. The
settings are Enabled or Disabled.

USB KB/Mouse Legacy Support
Set this option to Enabled to enable support for older keyboards and mouse
devices if the USB Function option is set to Enabled. The settings are Enabled
or Disabled.

Port 64/60 Emulation
Setting this option to Enabled allows a USB keyboard to act like a legacy
keyboard. If this option is not Enabled, USB keyboard lights will not work
under Windows NT. With other operating systems, a USB keyboard will work
normally with this option Disabled. The settings are Enabled or Disabled.

SERR#
Set this option to Enabled to enable the SERR# signal on the bus. The settings
are Enabled or Disabled.

PERR#
Set this option to Enabled to enable the PERR# signal on the bus. The settings
are Enabled or Disabled.

WSC# Handshake
Set this option to Enabled to enable handshaking for the WSC# signal.
Handshaking is a form of encryption; see the Glossary for more information.
The settings are Enabled or Disabled.

USWC Write Post
This option sets the status of USWC posted writes to I/O. USWC is a type of
memory that is used by VGA devices. The settings are:

«
...
43
44
45
46
47
...
»

Summary of Contents for S1830 TSUNAMI AT










































































Reviews:

No comments