http://www.tyan.com
13
Next, connect your IDE cables (if you’re using IDE hard drives).
The colored stripe on the cable (pin 1) should face towards the battery.
In Figure 3 you can see how the IDE cables should look when they are
connected to your hard
drive. Notice how Pin 1
(denoted by a red
stripe) is connected so
that it is next to the
power connector of the
drive. In most cases,
this is the proper way of
connecting your IDE
cable to the hard drive.
Figure 4 shows the IDE
cable properly con-
nected to the
motherboard.
Contact your hard disk
drive manufacturer or
documentation for more
INST
ALL
Figure 3
Figure 4
Pin 1
