TYAN S1682D, Manual

Page: 10 / 29

10 S1682D-001-02 http://www.tyan.com
2.3.2 Summary of Jumper Settings
Refer to the following table for quick reference of jumper settings:
Jumper # Assignments Pg. #
J8, J10 Voltage ID: J10: Primary CPU, P.13
J8: Secondary CPU
J20, J23 CPU Fan P10, P21
J19 CHS Fan (Chassis Fan) P10
J11, J12, J37 Bus Speed P12
J13-J16, J24-27 DRAM Voltage Select P12
J21, J22 Universal Serial Bus (J21:USB2, J22:USB1) P14
J29 Pins 1,2:Power on,
Pins6-11:Infra Red,
P14,15,16
Pins13-16:HDD LED, Pins18-20:Power LED
Pins22,23:Reset, Pins24-27: Speaker
J30, J36 I/O Select P12
J31-34 CPU Speed Settings P12
J39 Super I/O Clock Select P13
( *Do not Change) P13
J44 CMOS Reset P12,17
J56 BIOS EEPROM Voltage P14
( *Do not Change)
J1-J5,J9,J35, Reserved
P14
J38,J45-55,J57
Block J29 Pin Assignments
Power on: Pins 1,2 (close)
Infra Red: Pins 6-11 (close)
HDD LED: Pins 13-16 (close)
Power LED: Pins 18-20 (close)
Reset: Pins 22, 23 (close)
Speaker:Pins24-27
(Cover Pins1&2 with a jumper cap to short the circuit between these pins)
(Cover Pins6 to 11with a jumper cap and short the circuit between these pins)
(Cover Pins13 to 16 with a jumper cap and short the circuit between these pins)
(Cover Pins18 to 20 with a jumper cap and short the circuit between these pins)
(Cover Pins22 & 23 with a jumper cap to short the circuit between these pins)
(Cover Pins24 to 27 with a jumper cap and short the circuit between these pins)