TYAN GT93-B7106, Service Engineer'S Manual

Page: 34 / 90

http://www.tyan.com
34
NOTE: A new heatsink comes with pre-applied thermal grease.
Once the heatsink has been removed from the processor, you need to clean the
processor and heatsink using an alcohol solvent. Then apply new thermal grease
before reinstalling the heatsink.
4.
Carefully flip the heatsink. Align the heatsink with the CPU socket by the guide
pins and make sure the gold arrow is located in the correct direction. Then place the
heatsink onto the top of the CPU socket.
5. To secure the heatsink, use a T30 Security Torx to tighten the screws in a
sequential order (1  2  3  4). NOTE: When disassembling the heatsink, loosen the
screws in reverse order (4  3  2  1).
6. Repeat the procedures described earlier to install the second processor and
heatsink.