TYAN B4882, User Manual

Page: 51 / 72

43
Appendix
BIOS
Introduction
Your Transport TX46 (B4882) system includes a powerful
TYAN Thunder K8QS S4882 motherboard with Phoenix
BIOS on 4 MB LPC flash ROM.
The BIOS is the motherboard’s basic input/output system.
The BIOS contains all the settings required to control the key-
board, display, disk drives, serial communications, and a
number of miscellaneous functions. This section of the
appendix describes the various BIOS settings that can be
used to configure your system.
BIOS setup utility
With the BIOS setup utility, you can modify BIOS settings and
control the special features of your computer. The setup util-
ity uses a number of menus for making changes and turning
the special features on or off.
Note:
All menus are based on a typical
system. The actual menus displayed on your
screen may be different and depend on the
hardware and features installed in your com-
puter.
To start the BIOS setup utility:
1. Turn on or reboot your system.
2. Press <F2> during POST to start the BIOS setup utility.