Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Table: 100 lbs
CAUTION:
If you overload your
furniture, injuries can occur.
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
Ef (1)
Assembly
Instructions Sheet
Ee (1)
Allen Wrench
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Tabletop ceramic tiles must be stored during fall and winter months in a dry location
where temperatures will not fall below 32°F (0°C).Always use an umbrella base to
secure umbrella.Ensure the “o” ring is in place in the umbrella hole in the
glass top before inserting umbrella. Make sure umbrella is in the closed
position when not in use and during high winds.Use furniture covers or store
indoors during cold or inclement weather.
4
Ea (8 + 1 spare)
Bolt
Eb (8)
Metal Washer
Ec (4 spare)
Thicker Tile Bumper
Ed (4 spare)
ThinnerTile Bumper
Summary of Contents for D71 M20308
Page 7: ......
