13
a. Attach part
K
(external collar) onto the ends of both part
E
(metal arm pipe with fixed
hook) components.
b. Insert part
F
(male extension pipe) into part
A
(end angle tube with wheel hole) and
part
B
(end angle tube) and secure with a part
N
(tri wing hand screw) for both tubes.
c. Slide part
E
(metal arm pipe with fixed hook) over part
F
(male extension tube) and
secure with 2 x part
N
(tri wing hand screw) for at each end.
a. Stand can be adjusted in length and in height as your hammock stretches over time
making it taught again.
b. We recommend setting the frame up on the shortest settings first then adjusting
as required.
c. Your hammock should not sag onto the ground once you sit in it, there should be
a medium taught ness in length height off the ground.
4
5
HAMMOCK STAND
ASSEMBLY INSTRUCTIONS
NOTE:
Make sure you have the same amount of visible holes at each end of the stand.
