10
HAMMOCK STAND
ASSEMBLY INSTRUCTIONS
a. Insert part
L
(plastic inside collar) into both ends of the short tube on part
A
(end angle
tube with wheel hole). Ensure the cut-out detail on the collars aligns with the holes on
the short tube.
b. Thread part
D
(metal stand pipe) through the tube at the bend of part
A
(end angle tube
with wheel hole) and secure in place with 2 part
N
(tri wing hand screws).
c. Assemble the part
H
(wheels) to either side of part
A
(end angle tube with wheel hole)
using parts
G
(wheel assembly screw),
I
(wheel assembly nut) and
J
(wheel assembly
washer).
d. Attach part
K
(plastic external collar) by pushing onto both ends of part
A
(end angle
tube with wheel hole).
e. Push to attach part
M
(plastic stand feet) onto both ends of part
D
(metal stand pipe).
Ensure that the flat ridged detail is facing the ground.
1
