Twose TE480, Operator'S Manual

Page: 17 / 50

6
SAFETY INFORMATION
This machine has the potential to be extremely dangerous, in the wrong hands it can kill or
maim. It is therefore imperative that the owner, and the operator of this machine, read the
following section to ensure that they are both fully aware of the dangers that do, or may
exist, and their responsibilities surrounding its use.
The operator of this machine is responsible not only for their own safety but equally for
the safety of others who may come into the close proximity of the machine, as the owner
you are responsible for both.
POTENTIAL SIGNIFICANT DANGERS ASSOCIATED WITH THE USE OF
THIS MACHINE:
▲
Being hit by debris thrown by rotating components.
▲
Being hit by machine parts ejected through damage during use.
▲
Being caught on a rotating power take-off (PTO) shaft.
▲
Being caught in other moving parts i.e.: belts, pulleys and cutting heads.
▲
Electrocution from Overhead Power Lines (by contact with or ‘flashover’ from).
▲
Being hit by cutting heads or machine arms as they move.
▲
Becoming trapped between tractor and machine when hitching or unhitching.
▲
Tractor overbalancing when machine arm is extended.
▲
Injection of high pressure oil from hydraulic hoses or couplings.
▲
Machine overbalancing when freestanding (out of use).
▲
Road traffic accidents due to collision or debris on the road.
BEFORE USING THIS MACHINE YOU MUST:
▲
Ensure you read all sections of the operator handbook.
▲
Ensure the operator is, or has been, properly trained to use the machine.
▲
Ensure the operator has been issued with and reads the operator handbook.
▲
Ensure the operator understands and follows the instructions in operator handbook.
▲
Ensure the tractor front, rear and side(s) are fitted with metal mesh or polycarbonate
guards of suitable size and strength to protect the operator against thrown debris or
parts.