Two Technologies TechTerm TT1R2, Technical Reference Manual

Page: 26 / 50

Manual Configuration 16
Changing Parameter Settings
The following procedure describes how to change parameter settings using a 45 or 30-key
TechTerm, other keypad configurations may work differently.
To change the parameters settings:
1.
For 45 or 30-key terminals, simultaneously hold CTRL and SHIFT , and press F1 .
For 20-key terminals, simultaneously hold BKSP and ENTER , and press F1 .
Note: You can also access the Parameter menu, by removing power, simultaneously holding
CTRL, SHIFT and F3 (for 20-key terminals, use BKSP, ENTER and F3), and reapplying
power.
The Parameter menu appears with the first parameter on the top line.
2. To change the value of the current parameter, press F1 .
3. To view the next parameter, press F2 .
4. To view the previous parameter, press F3 .
5. To save any changes and exit the menu on 45 or 30-key terminals, press F5 . To exit
the menu without saving any changes, press F4 .
To save any changes and exit the menu on 20-key terminals, press F4 .
If you make any changes, the TechTerm will display the following screen: