Twister batchone GO, User Manual, Page: 19 / 34

T W I S T E R T R I M M E R . C O M
pg | 19
Ɛĺ Ensure the BatchOne Go is unplugged
and remains unplugged un
ঞ l it is fully
assembled.
Ƒĺ Hook the saddle onto both sets of saddle
hooks (see Fig’s 21 and 22).
ƒĺ Connect the motor assembly:
-ĺ Holding the motor assembly at an
angle, hook the motor assembly latch
pins onto the motor latch brackets
(see Fig. 23).
0ĺ Rotate the motor assembly and guide
the slots in the motor moun
ঞ ng plate
over the dowel pins in the rear plate (see Fig. 24).
1ĺ Ensure the motor moun ঞ ng plate is Y ush against the rear plate.
7ĺ Using a phillips head screwdriver, ঞ ghten both motor mount fasteners (see Fig. 25).
Ɠĺ Insert the tumbler (see Fig. 26).
THE BATCHONE GO MUST
BE UNPLUGGED DURING
REASSEMBLY.
DANGER
!
Fig. 21 Fig. 22
R E A S S E M B L Y