T W I S T E R T R I M M E R . C O M
pg | 14
Step 4: Connect to Power
Ɛĺ
Plug the BatchOne Go power cable into
the IEC socket on the motor assembly
(see Fig. 11).
Ensure both ends of
the power cable are dry before
connec
ঞ
ng!
Ƒĺ
Plug the other end of the power cable
into an outlet or extension cord.
Step 5: Trim
Ɛĺ
Press the motor assembly start bu
on.
Ƒĺ
When the desired trim level is achieved, press
the motor assembly stop bu
on and wait for
the motor to come to a complete stop (see
Recommended Trimming Time
).
Step 6: Unload the Machine
Ɛĺ
Empty the tumbler in any of the following
ways:
•
Unplug the power cord, remove the
RECOMMENDED TRIMMING TIME
For the
C
rst trim of a new strain, a
[
er
C
ve minutes, stop the tumbler, remove the tumbler
plug, and inspect the product. Repeat the inspec
ঞ
on every two minutes a
[
erwards un
ঞ
l
the desired trim level is achieved. Record this
ঞ
me for future trims of the same strain.
Fig. 11
O P E R A T I O N
TO AVOID ELECTRIC SHOCK,
ENSURE THE POWER CABLE IS
DRY BEFORE CONNECTING IT.
DANGER
!
Summary of Contents for batchone GO
Page 1: ...T W I S T E R T R I M M E R C O M PN 21 10189A_REV00 U S E R M A N U A L...
Page 2: ...T W I S T E R T R I M M E R C O M...
Page 17: ...T W I S T E R T R I M M E R C O M pg 17 D I S A S S E M B L Y Fig 15 Fig 16 Fig 14 1 2 Fig 17...
Page 20: ...T W I S T E R T R I M M E R C O M pg 20 Fig 23 Fig 24 Fig 25 Fig 26 R E A S S E M B L Y...