Selecting an lfo waveform
To select any of the 3 LFOs
simply move one of the LFO
rate
or
depth
knobs.
Use the 4 waveform buttons to select a waveform. Selecting an already lit
waveform will put the LFO in manual mode. Now you can adjust the
value of the LFO at any time with its depth knob
LFO depth
Set the depth of an LFO with its
depth
knob. This defines the amount of
effect the lfo will have on the associated knobs or faders.
LFO rate
Set the rate of an LFO with its
rate
knob. Each LFO can also individually
be configured to sync to incoming MIDI clock at 8 different speeds,
please refer to SETUP instructions for more details. The LFO waveform
LED will blink to indicate the rate of the LFO.
Note: an LFO can modulate both rates and depths of other LFOs but not those of itself.
retrig
When this feature is active each keypress will retrigger the LFO from the
beginning of its cycle. Otherwise the lfo will only trigger on the first key.
loop
When this feature is active the LFO will loop endlessly instead of in a one-
shot manner.
Looping noise
When an LFO is set to noise, it can send a loop through a table of
randomly generated values. The table length can be 8, 16, 32, or infinite
values. Press the noise waveform multiple times to set the table length.
The screen will show 8, 16,32 or blank (a new random). Every time you
press the noise waveform, the tables are regenerated.
The table length setting is stored globally for each LFO.
Note: an LFO can modulate both rates and depths of other LFOs but not those of itself.
