5
Fig. 4
Hardware Used
BB
AA
CC
Bolt
x 10
Washer
x 10
Wood Dowel
x 6
BB
G
AA
CC
4. Insert one wood dowel (CC) into each of the
pre-drilled holes on the top edges of the assembly
from step 3. Then locate mantel/top (G) and lay
finished side up on top of completed assembly.
From the inside, attach mantel/top (G) using bolt (AA)
and washer (BB) through the pre-drilled holes in the
mounting blocks (Fig.4).
HAND TIGHTEN ONLY.
Using Phillips screwdriver tighten all bolts alternating
top and bottom, left and right.
Fig. 5
5. Rest back panel (I) on mantel top back edge. Allow
the pre-installed magnets to keep the back panels in
closed position (Fig.5).
I
Fig. 6
6. There are levelers located on the bottom of the
front wood feet. The height can be increased by
twisting counter-clockwise (Fig.6).
