background image

        Information 

Decoration lighting, not suitable for household illumination. The crossed-out wheeled bin symbol indicates that the 

item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local 
environmental regulations for waste disposal.

Caution Warning

This is a class B product. In a domestic environment this product may cause radio interference in which case the user may be required to 
take adequate measures! Do not connect the chain to the supply while it is in the packing. Do not connect parts of this light chain to those 
of another manufacturer. NON-REPLACEABLE BULB. Built-in LED light source. The connecting cable cannot be repaired or replaced. If the 
cable is damaged, the entire fitting must be discarded. Danger! Strangulation hazard. Hang out of reach of young children.

MODEL No.: see label
Single LED luminous flux: red 40-120 mcd, green 200-500 mcd, blue 40-120 mcd
IP protection: IP44

Technical Specifications

Description

C9

G35

Mini 56

Mini 105

Garland

Rated wattage

 (Amps)

Lamp counts

3.1 W

130 mA

25 L

9864B

24 V 24 W

24 V 24 W

24 V 24 W

24 V 24 W

24 V 24 W

9864B

9864B

9864B

9864B

25 L

56 L

105 L

50 L

7

7

4

2

4

3.7 W

3.7 W

6.5 W

11.5 W

6.3 W

3.1 W

130 mA

5.5 W

230 mA

9.6 W

400 mA

5.5 W

230 mA

Total Wattage

LED Model 

Number

Power Adapter 

Rating

Estimated Maximum Light 

Strings Can Be Connecting

2. Make sure connectors are fully inserted and secured. Twist all connector rings until hand tight.
3. This product can be connected to other Twinkly lights set up to a maximum of 24 Watts (1 Amp) in total. However, to avoid the risk of fire 

or personal injury, do not exceed the maximum wattage capacity.

4. When not in use, store the product in a cool, dry place away from sunlight.
5. Before working on the product, pull the power plug! Do not connect the chain to the power supply while it is in the packing.
6. The lamps are not replaceable.
7. WARNING – THIS LIGHTING CHAIN MUST NOT BE USED WITHOUT ALL GASKETS BEING IN PLACE.
8. Do not interconnect parts of this lighting chain with parts of another manufacturer's lighting chain.
9. Interconnection shall be made only by using the supplied connectors. Any open ends must be sealed-off before use.
10. Only a maximum of 50 meters may be interconnected.
11. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
12. These products may only be electrically connected using products that belong to the system! Elements from this set of light chain may 
       not be used with elements from sets of light chain produced by other manufacturers.
13. This light chain may not be used without the properly attached sealing rings.

2

Summary of Contents for C9





















Reviews: