5
Fig. 3
Fig. 4
Fig. 5
4. To remove the drawer, fully extend the drawer out
and locate the black plastic levers located on the
metal glide tracks of the drawer box. At the same
time, push down on the plastic lever while gently
pulling the drawer out from the cabinet to disengage
the drawer box from the glide. Set the drawer aside.
Hardware Used
BB
AA
CC
Bolt
x 4
Washer
x 4
Wood Dowel
x 6
AA
E
DD
EE
BB
CC
CC
3. Insert Wood dowel (CC) into each of the pre-drilled
holes on the top edges of the assembly from step 2.
Then locate Media Top (E) and lay finished side up
on top of completed assembly.
From the inside, attach Media Top (E) using Allen
Key (DD) to tighten Bolts (AA) ,Spring Washer (EE)
and washers (BB) through the pre-drilled holes in the
mounting blocks.
DD
Allen Key
EE
Spring Washer
x 4
