4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts
with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
1. There are levelers located on the bottom of the
Wood Feet, the height can be increased by twisting
counter-clockwise.
Open the drawer, unscrew the bolts located on
the front of the drawer, re-install the Pulls on the
front face of the drawer.
Attach leveling foot (F) to the bottom of the hearth/
base (A) by twisting it clockwise.
2. Insert one Wood Dowel (CC) into each of the
pre-drilled holes .
Push Support Panel (D) snug to the top of the
Cabinet (A).
Locate upper side panels (B, C) on the top of the
Cabinet (A), as shown in diagram.
Make sure that dowels are seated into the pre-drilled
holes.
Attach these panels using Allen Key (DD) to tighten
Bolts (AA), Spring Washer (EE) and washers (BB)
through holes in the upper side panels (B, C).
HAND TIGHTEN ONLY.
B
A
F
Fig. 2
Fig. 1
CC
CC
C
D
AA
DD
EE
BB
Hardware Used
BB
EE
AA
CC
Bolt
x 4
Washer
Spring Washer
x 4
x 4
Wood Dowel
x 6
x 1
DD
Allen Key
Unscrew
Install