M
L
LEFT
CURVED
PANEL
RIGHT
CURVED
PANEL
N
COMPLETED
FRONT
ASSEMBLY
N
N
HEARTH/BASE
A
I
H
M
L
4. Locate the Left Curved Panel (H), line up
the holes in the mounting blocks on the
panel with the holes on the Left Front Panel
(B). Insert a Bolt (L) and Washer (M) into
the holes in the mounting blocks.
HAND TIGHTEN ONLY.
5. Locate the Right Curved Panel (I), line up
the holes in the mounting blocks on the
panel with the holes on the Right Front
Panel (C). Insert a Bolt (L) and Washer (M)
into the holes in the mounting blocks.
HAND TIGHTEN ONLY.
6. Locate Hearth./Base (A) and set out
finished side up to the floor.
7. Place a drop of Wood Glue (O) into each of
the pre-drilled holes on the edges of the
completed Front Panel Assembly from Step
5 Then insert one Wood Dowel (N) into
each of the pre-drilled holes. Attach the
completed Front Panel Assembly to
Hearth/Base. Insert a Bolt (L) and Washer
(M) into the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
8. Locate Left Side Panel (E), and place a drop
of Wood Glue (O) into each of the pre-
drilled holes on the edges of the panel. Then
insert one Wood Dowel (N) into each of the
pre-drilled holes. Attach the Left Side Panel
(E) to the completed Front Panel Assembly
and Hearth/Base (A). Make sure the dowel
seat into the holes in the pre-drilled holes in
the Hearth/Base (A). Insert a Bolt (L) and
Washer (M) into the pre-drilled holes in the
holes in the mounting blocks.
HAND TIGHTEN ONLY.
9. Locate Right Side Panel (F), and place a
drop of Wood Glue (O) into each of the
pre-drilled holes on the edges of the panel.
Then insert one Wood Dowel (N) into each
of the pre-drilled holes. Attach the Right
Side Panel to the completed Front Panel
Assembly and Hearth/Base (A). Make sure
the dowels seat into the holes in the pre-
drilled holes on the Hearth/Base.(A). Insert
a Bolt (L) and Washer (M) into the pre-
drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
COMPLETED
FRONT
ASSEMBLY
RIGHT
SIDE
PANEL
LEFT
SIDE
PANEL
HEARTH/BASE
A
F
E
N
M
L
M
L
E-3
